FEELWORLD LUT7S 7" SDI Field Monitor

True color - professional color calibration Use the Rec.709 color standard FEELWORLD builds to the professional Rec.709 HD color standard and adds color calibration technology: every unit is calibrated at the factory with professional instruments, so you get accurate color reproduction with no color shift and see the true image while you shoot video. More resolution, less reflection The FEELWORLD LUT7 monitor renders the picture at 323 pixels per inch (PPI), which makes for clean, accurate field monitoring. The panel is optically bonded glass with an anti-reflective coating. What really sets it apart is the light-emitting diode (LED) backlight, which delivers a 1200:1 contrast ratio and sRGB / Rec.709 color gamut. The wide 160 degrees viewing angle makes it easy for several members of the crew to watch at the same time. Large monitor with Easy Touch control The innovative touchscreen LCD interface gives you incredible control. The important monitoring functions are reached with simple tap and swipe gestures. You can turn the scopes on from the touchscreen, along with focus and exposure assist. Plus you can load 3D LUTs! Connect to a wireless transmitter and to the Director Monitor Send the feed on so the director of the shooting crew can watch at the same time. On location, going cable-free makes moving between setups far more flexible. Show the live image on several screens at once. Mount it on cameras, on rigs, or put it wherever you need it There are 3 standard-size mounting points. Use the 1/4 inch hole on the bottom to sit it securely on top of the camera as the ultimate viewfinder. The 1/4 inch holes on the left and right side take a magic arm, a bracket and so on, so the whole crew can watch the screen.

VIDEO ASSIST FEATURES

* Supports 3D LUT log to Rec.709 and user 3D LUT upload (HDMI does not support LUT output) * Touchscreen support * High resolution: Full HD 1920x1200, high contrast: 1200:1 * 2200nit daylight viewable, light sensor for automatic dimming * 160 degrees wide viewing angle IPS panel * Provides auxiliary power output, letting shooters power their cameras * Parade (RGB, YUV, Y) * VectorScope * RGB histogram * Histogram * Peaking Focus Assist (five peaking colors to choose from: red, green, blue, white, yellow; peaking level adjustable 1 - 10) * False color * Zebra exposure (adjustable 1% - 100%) * Scan mode (under scan, over scan) * Zoom (100% - 300%) * Anamorphic mode (1.25x, 1.33x, 1.5x, 2.0x, 2.0x mag) * Pixel-to-pixel * Nine grid * Center marker * Safe marker (70%, 80%, 90%, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1) * Ratio marker (16:9, 16:10, 4:3, 1.85:1, 2.35:1) * Marker color (red, green, blue, white, black, yellow) * Check field (red, green, blue, gray) * Image flip (H, V, H / V) * Image freeze * Color temperature adjustment

Import a user LUT cube S-log2 / 3, V-log, Log-C and so on. It converts log mode to REC709 for every major camera. The LUT loading function makes color calibration of the footage you have just shot easier and more intuitive, streamlines the workflow and speeds up the job. A creative user 3D LUT cube or a calibration 3D LUT cube can be loaded into the monitor from an SD card.

Video analysis assistant pattern Waveform / Vectorscope / Histogram waveform This essential tool helps you calibrate professional video cameras. It shows the overall brightness of the picture, helping the video professional correct exposure. The waveform also checks how evenly a chroma key screen or a backdrop is lit.VectorscopeThe vectorscope shows how saturated the picture is and where its pixels land on the color spectrum. It can be displayed in different sizes and positions, so you can watch the color gamut range in real time. Luminance histogram The luminance histogram is a quantitative tool for checking the brightness of the picture. It plots the distribution of brightness along the horizontal axis (left: dark, right: bright) and the number of pixels at each brightness level along the vertical axis. RGB histogram The RGB histogram is a graphic display of tonal distribution showing the histogram of the red, green and blue channels. Suitable for HD-SDI and HDMI signal monitoring. All scopes mode This mode shrinks the video image on the 7 inch screen and tiles the selected waveform, vectorscope, histogram and embedded audio along the edge of the picture. Audio meter monitoring The audio level meters show numeric readings and peak levels. They give you accurate audio level displays so mistakes are caught while you monitor. Over SDI audio it displays 4 channels of embedded audio meters. Over HDMI audio only a 2 channel audio display is supported. Peaking focus assist The peaking filter helps the camera operator pull the sharpest possible focus. When it is on, the internal processor draws a colored highlight on the screen wherever sharp edges appear. The peaking color can be switched between yellow, red, green, blue and white to suit the tones of the subject. The focus level is adjustable from 1 to 10. False color The False Color filter helps you set camera exposure. As the iris is adjusted, the elements of the picture change color according to their brightness. That lets you nail exposure without expensive, complicated external test gear. Exposure (zebras) Exposure assist helps you set exposure in Zebra Pattern mode. Areas judged to be overexposed are covered with moving warning stripes. The zebra value is adjustable from 1% to 100%.Check field Check Field is an assist function for setting the camera's color. In check field mode the picture is rendered with red, green, blue or gray pixels only, because hue and saturation can be set faster and more accurately that way. Zoom (100% - 300%) Magnify any part of the HD signal for a high quality close-up check. Use the touchscreen to zoom in, zoom out and move the picture around once it is magnified. Anamorphic mode The built-in de-squeeze options - 1.25x, 1.33x, 1.5x, 2.0x or 2.0x mag - let you work with anamorphic lenses or adapters and see the picture de-squeezed even when the camera itself does not de-squeeze its output. Image flip Image flip turns the picture horizontally, vertically or horizontally / vertically. Switch horizontal and vertical flip on at the same time and you get a simultaneous horizontal / vertical flip. Nine grid The nine grid is the most common and most basic composition aid. The picture area is divided into nine equal cells. Pixel to pixel Lets the filmmaker check the picture from the source signal 1:1, with no scaling. This function is essential for capturing the finest detail. Center Marker and Safe Marker Safe marker for viewing and composition (70%, 80%, 90%, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1). The marker color can be switched between yellow, red, green, blue, white and black to suit the different tones of the subject. Ratio marker There are several ratio markers (16:9, 16:10, 4:3, 1.85:1, 2.35:1); the ratio marker can be shown with 4 levels of transparency (0%, 25%, 50%, 75%). The marker color can be switched between yellow, red, green, blue, white and black to suit the different tones of the subject.

TECHNICAL DATA

Open tab

DISPLAY SPECIFICATION

• Screen size: 7" IPS
• Resolution: 1920x1200 pixels
• Pixel pitch: 0.07875 (H) x 0.07875 (W) (mm)
• Aspect ratio: 16:10
• Brightness: 2200 cd/m2 (light sensor)
• Contrast ratio: 1200:1
• Viewing angle: 80 degrees / 80 degrees (L / R) 80 degrees / 80 degrees (U / D)

INPUT OUTPUT

• Input: 1 X 4K HDMI
• Output: 1X 4K HDMI, DC output ( Barrel (3.5 mm outer, 1.1 mm inner) barrel output for powering cameras with a camera-specific adapter)
• Audio: 3.5 mm stereo headphone
• HDMI input / output supported formats: 480i / 576i / 480p / 576p 1080i (60 / 59.94 / 50) 720p (60/59.94/50/30/29.97/25/24/23.98) 1080p (60/59.94/50/30/29.97/25/24/23.98) 4K UHD 3840x2160p (30/29.97/25/24/23.98Hz), 4096x2160p (24Hz)

GENERAL

• Input voltage: DC7 - 24V
• Power consumption: 20W max
• Operating temperature: -20 degrees C - 55 degrees C
• Storage temperature: -30 degrees C - 65 degrees C
• Mounting: 1/4"-20 threaded socket (left, right, bottom)
• Unit size: 190Lx126Hx27D (mm)
• Battery plate: Dual F970 battery plate
• Compatible batteries: Sony F970, F960, F950, F930, F770, F750, F730, F570, F550, F530, QM91D, QM91, QM90D, QM90, QM71D, QM71, QM70D, QM70, QM51D, QM51, FM71. Because the FEELWORLD LUT70S monitor is extremely bright, we recommend using a Sony F970 battery; two F970 batteries will run it for 3-4 hours.
• (Note: battery not included, it has to be bought separately)
• One F970 battery fitted to the monitor runs for about 2 hours, and two fitted F970 batteries run for about 4-5 hours. You can choose to fit one or two battery plates.