
GODOX MoveLink LT1 Lightning
Specifications
Description
The Godox MoveLink LT1 Lightning is a wireless microphone system with one transmitter and a receiver with a Lightning plug, for an iPhone or iPad with that connector. You clip the transmitter to your speaker and record up to 50 metres from the receiver. The system runs on 2.4 GHz and finds a clear channel by itself.
Highlights
Sound
The built-in microphone is omnidirectional, so your speaker does not have to talk straight into the capsule. To get the microphone closer to the mouth, plug the supplied lavalier into the 3.5 mm input. At 120 dB the signal stays clean, and the dynamic range is 100 dBA.
Mounting
The transmitter has a clip on the back for a collar or a waistband. For clothing that a clip will not hold, a metal plate is included that you place behind the fabric; the transmitter holds onto it magnetically.
Battery
Transmitter and receiver have a built-in 300 mAh lithium battery. Charging runs over USB-C with the cable in the box. The system works from -10 to 50 degrees, so it keeps going outdoors in winter.
- Transmitter of 27 grams, 50 by 40 by 14 millimetres
- Range up to 50 metres
- Frequency range from 50 Hz to 20 kHz
- TFT screen on the receiver for reading the level
- Windshield and a 1.2 metre lavalier microphone included
Characteristics
- Type: Wireless microphone system
- Number of transmitters: 1
- Transmission: 2.4 GHz frequency hopping
- Polar pattern: omnidirectional
- Sensitivity: -32 dB ±2 dB
- Signal-to-noise ratio: 70 dB or higher
- Dynamic range: 100 dBA
- Frequency range: 50 Hz to 20 kHz
- Maximum sound pressure: 120 dB
- Range: 50 m
- Receiver connection: Lightning
- Microphone input: 3.5 mm TRS
- Display: TFT
- Mounting: clip on the back
- Battery: built-in lithium, 300 mAh
- Operating temperature: -10 to 50 °C
- Dimensions: 50 x 40 x 14 mm
- Weight: 27 g
In the box
- 1 x Godox LT RX receiver with Lightning
- 1 x Godox TX transmitter
- 1 x windshield
- 1 x omnidirectional lavalier microphone of 1.2 m
- 1 x USB-C cable
- 1 x carrying bag
- 1 x metal plate
- 1 x set of pins







