
Godox Witstro AD400 Pro II
Specifications
Description
The Godox Witstro AD400 Pro II gives you 400 Ws of battery-powered flash, so you can work with studio light on location without a power outlet. This second generation adds a colour display, coloured group indicator lights and a built-in receiver that pairs with the Godox X3 at the press of a button. A full battery gets you around 460 full-power flashes.
Highlights
Power
You set the output in ten stops from 1/512 to full power, with 0.1 increments in between. In freeze mode the flash duration gets short enough to capture splashing water or a jumping dancer in sharp detail. Recycle time runs from 0.01 to 1 second, so at lower power you can fire in quick succession.
Modelling lamp
The head has a 30 W LED modelling lamp with a CRI of around 97. In constant mode you set brightness and colour temperature yourself, from a warm 2800 K to daylight at 6000 K. In prop mode the brightness follows the flash output, so you can see the ratio between your lights before you shoot. Because the lamp does not flicker, you can also use it as a continuous light for video.
Wireless
The receiver for the Godox 2.4G X system is built in and has a range of about 100 metres. With the X3 you pair every flash in one tap, without setting channels or groups, and the Xpro II, X2T and X1 work with it too. Each group has its own colour, shown by an indicator light on the flash. In a multi-light setup you see at a glance which unit belongs to which group, even from a distance or in the dark.
Power supply
The flash runs on a removable 21.6 V, 2600 mAh lithium battery. If you spend the whole day in the studio, plug the optional AC400 adapter into the built-in mains input. The optional Godox UC46 USB charger fills a battery in an hour and a half, and it can charge batteries for the AD600Pro II and the AD600 series at the same time.
Light modifiers
The front has a Godox mount. The supplied Bowens adapter fits over it without blocking that mount, so you can use modifiers from both systems. To place the head away from the body, low to the ground or overhead, use the optional AD-H400P extension head with its 2 metre cable.
- High-speed sync up to 1/8000 s, even in bright daylight
- Freeze mode with a flash duration down to 1/27770 s (t0.1)
- Bi-colour LED modelling lamp that doubles as a video light
- One-tap pairing with the X3, 16 groups each with their own colour
- TTL for Canon, Nikon, Sony, Fujifilm, Olympus, Panasonic, Pentax and Leica
- Godox mount with a Bowens adapter included
Characteristics
- Type: Battery-powered flash for location and studio
- Power: 400 Ws
- Guide number: 72 (ISO 100, in metres, with efficient reflector)
- Flash mode: wireless off M and Multi, wireless on TTL, M and Multi
- TTL: Canon E-TTL II, Nikon i-TTL, Sony, Olympus, Panasonic, Fujifilm, Leica, Pentax
- Power control: 10 stops, from 1/512 to 1/1, in 0.1 increments
- Flash duration normal (t0.1): 1/230 s to 1/16120 s
- Flash duration colour mode (t0.1): 1/230 s to 1/11900 s
- Flash duration freeze mode (t0.1): 1/3470 s to 1/27770 s
- Recycle time: 0.01 s to 1 s
- Sync: HSS up to 1/8000 s, first and second curtain
- Stroboscopic flash: up to 100 times, 100 Hz
- Delayed flash: 0.01 s to 30 s
- Photocell: S1, S2, off
- Flash tube colour temperature: 5800 K (± 200 K)
- Display: TFT colour display
- Other functions: mask, beep, flash duration indication, battery level indicator
- Cooling: fan
- Modelling lamp: bi-colour LED, 30 W
- Modelling lamp brightness: 10% to 100%
- Modelling lamp colour temperature: 2800 K to 6000 K
- Modelling lamp colour rendering: CRI approx. 97, TLCI approx. 98
- Wireless system: Godox 2.4G X system, built-in receiver
- Groups: 16 (0 to 9, A to F)
- Channels: 32
- Wireless ID: 01 to 99, off
- Range: approx. 100 m
- Wired sync: 3.5 mm sync cable
- Battery: lithium, 21.6 V, 2600 mAh
- Flashes per charge (full power): approx. 460
- Power saving: auto off after 30 to 120 minutes
- Modifier mount: Godox mount, Bowens adapter included
- Dimensions: 211 x 129 x 90 mm (with battery, without flash tube and reflector)
- Weight: approx. 2 kg (with battery, without flash tube and reflector)
In the box
- 1 x Godox Witstro AD400 Pro II
- 1 x Lithium battery
- 1 x Charger
- 1 x Power cord
- 1 x Flash tube
- 1 x Reflector
- 1 x Protective cap
- 1 x Bowens adapter
- 1 x Wrench
- 1 x Carrying bag







