
GODOX WMicS1 Pro Kit 2
Specifications
Description
The Godox WMicS1 Pro Kit 2 is a set with two transmitters and one receiver for wireless sound on video, interviews and live streams. The system runs on 514 to 596 MHz and gives you 96 channels to find a clear frequency. With two transmitters you record two speakers separately, in an interview for instance.
Highlights
Channels
The 96 channels are split over group A and group B, 48 channels each. In a hall full of other equipment you move to whichever group is clear. The crystal-controlled PLL synthesiser holds the frequency in place.
Sound
The system carries 50 Hz to 20 kHz, with a signal-to-noise ratio of 70 dB. Latency stays at 12 ms, too little to show up on screen. You connect through the 3.5 mm port.
Power
You power transmitter and receiver over USB-C, or you drop in two AA batteries. On a long day outdoors that helps: with batteries a flat set is running again in a minute.
- 96 channels in two groups of 48, to work around interference
- 12 ms latency, so the sound stays in sync with your picture
- Audio range from 50 Hz to 20 kHz
- Runs on USB-C or on two AA batteries
- Metal housing of 63 x 21 x 198 mm
Characteristics
- Type: Wireless microphone system
- Frequency range: 514 to 596 MHz
- Channels: 96, split over group A and group B with 48 each
- Audio range: 50 Hz to 20 kHz
- Latency: 12 ms
- Signal-to-noise ratio: 70 dB
- Audio connection: 3.5 mm
- Power: USB-C 5 V, or two AA batteries
- Housing: metal
- Operating temperature: 0 to 50 °C
- Dimensions: 63 x 21 x 198 mm
- Weight: 212 g
In the box
- 2 x Godox WMicS1 Pro TX transmitter
- 1 x Godox WMicS1 Pro RX receiver
- 2 x omnidirectional lavalier microphone LMS-12B AXL
- 3 x belt clip
- 1 x 3.5 mm TRS to TRS audio cable
- 1 x XLR to 3.5 mm audio cable
- 1 x 3.5 mm TRS to TRRS audio cable
- 1 x shoe adapter with 1/4 inch thread
- 2 x USB to USB-C cable
- 1 x carrying bag
Goes well with this
Related products







