... hogy Te is képben legyél!
Follow Us
+36-70-366-7362 09:00 - 18:00
Yongnuo YN-622N TTL Rádiós kioldó szett

Yongnuo YN-622N TTL Rádiós kioldó szett

31 900 Ft (nettó: 25 118 Ft)

  • Kompatibilitás: Nikon i-TTL
  • Frekvencia: 2.4 GHz
  • Tartomány: 328′
  • Vakuüzemmódok: TTL és Manual
  • Csatornák száma: 7
  • Csoportok száma: 3
  • AF Assist Beam
  • High Speed, 1. és 2. redőnyre szinkronizálás
  • Csatlakozások: PC Sync Port és vakusaru
  • Akkumulátor: 2db AA akksi


Cikkszám: YN-622N Kategória: Címke:


Frequency 2.4 GHz
Range 328′ (100 m)
TTL Dedication i-TTL
Channels 7
Groups 3 (A, B, C)
Flash Modes TTL, manual
Sync Mode 1st curtain, 2nd curtain, high-speed sync
Max Sync Speed 1/8000 sec
Interface Output: Hot shoe, PC port
Input: Hot shoe
Battery 2 x AA batteries
Battery Life Standby: 60 hours
Dimensions 9.0 x 5.3 x 3.9 cm
Suit for (Camera) : Nikon D4 D3X D3S D3 D2X D800E D800 D700 D300S D300 D200 D7000 D90 D80 D5200 D5100
D5000 D3200 D3100 D3000 D60 D40X D40
Flash compatible (i-TTL): SB400 SB600 SB700 SB800 SB900 SB910
YN465N YN467N YN468N(II) YN560II YN560III YN565N YN568N
Yongnuo First Wireless i-TTL Flash Trigger YN-622N is Released now, it’s designed for Nikon Camera.
Using Digital FSK 2.4GHz frequency band with 7 channels, it has three mode, i-TTL ( II ), Manual and Multi, and it can fire flashes at 360 degree direction, the operating range is 100 metres.
It supports FEC, FEB, FEL, High-speed Sync, 1st. Curtain, 2nd. Curtain, Modeling flash, I-TTL II Group Ratio (ALL/A:B/A:B C), Manual/Multi group (ALL/ A:B/ A:B:C), Manual and Multi mode, Auto Zooming, Manual Zooming, AF Lamp.
Main function:
a), Support Full I-TTL Pass-through function when on camera
1), Mount one YN-622N transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or Multi mode.
2), Mount flash on hot shoe of YN-622N transceiver on camera, mount the second flash on other transceiver, both of flashes can be trigger at any direction in TTL, Manual or Multi mode.
Note: Speedlites on hot-shoe of transmitter support I-TTL II / Manual / Multi
b), Shutter Sync
1), High-speed Synchronous
The max. sync speed is 1/8000s, but some camera is just 1/4000s, and for those cameras and flashes who don’t suport HSS, the sync. speed is just 1/250s or less, different cameras have different Sync speed.
2), 1st. Curtain Sync
3), 2nd. Curtain Sync.
c), Remote Control Function
The parameter of flashes on hot shoe of receivers can be set up remotely through the camera manu directly.
d), Supporting mixed mode.
With this function, you can trigger remote speedlites in different modes, set up one YN-622N transceiver on hot shoe of flash in TTL mode, set up the second YN-622N transceiver on hot shoe of flash in manual mode, and the third YN-622N transceiver on hot shoe of flash in multi mode, all three flashes can be fired via the transceiver on hot shoe of camera, this mode is especially useful for those camera bodies without a built-in flash menu.
Note: Only FEC, FEB, Ratio and Shutter sync can be set in the camera side. Manua and Multi output need to be set on the flash speedlite.
e), Work with Strobe Studio flash light in HSS function
You can buy a PC Sync Cable RF-603 6.35mm cable to connect the transceiver with the studio flash, and then youcan use the non-high speed sync flash torealize hihger syand then you can use them together in HSS. The max. trigger voltage is less than 300 Voltage.
Note: The PC port is for output using only.
f), Awaking function
When half-pressing the shutter button of the camera, the hot shoe flash on the receiver will be awakened. ( for those flash has wake up function )
g), Zoom Function
Zoom Automatic: length will be changed depanding on the changes of lens.
Zoom Manual: Zoom length is within 24 – 105mm
Zoom Lock
h), Support Single-contact of camera and flash triggering ( the max. Sync. speed is 1/250s )
You can use it with Nikon camera or Nikon flash, but you just need to set up YN-622N in manual mode.
i), Flash Fire Ratio with I-TTL
You can set up different flash fire ratio and FEC for those flashs on hot shoe of receiver.
j), Support 2pcs AA batteries, ( 1.2v rechargeable battery ), Stand-by time is 60hours.
k), Dimension: 89.5 * 53 * 39MM, net weight is 78g.