Zhiyun-Tech GMB-CMF-04 Overview
The Zhiyun-Tech TransMount Max Servo Zoom/Focus Controller can be used interchangeably for zoom and focus control on the Crane 3-Lab and WEEBILL LAB gimbals. It has a powerful-enough motor to control zoom, whereas the lighter-weight TransMount Lite is designed for focus control only.
The Crane 3-Lab supports up to two motors at the same time, and it’s recommended to use the TransMount Max and TransMount Lite together if requiring both zoom and focus control on the Crane. The WEEBILL, however, supports only one motor, so the TransMount Max is recommended as the only solution because it can be used interchangeably for both functions.
Featuring a toolless design, the TransMount Max attaches on the gimbal using just the included thumbscrews. It can be controlled via the gimbal handwheel or the companion smartphone app. Secure it to the supplied support bracket and mounting rod using two thumbscrews, and attach this assembly to the bottom of the gimbal’s baseplate with the third thumbscrew. Then connect the servo to the gimbal with the provided USB cable, and connect the camera to the gimbal with one of the camera control cables the gimbal comes with. The USB cable connection provides zero-latency signal transmission.
- Key Features
- Can be used interchangeably for zoom and focus control
- Recommended as the zoom solution for the Crane 3-Lab, which supports two motors at the same time, and as the sole solution for the WEEBILL LAB, which supports only one motor
- Toolless design—assembles with the included support bracket and mounting rod and attaches to the bottom of the gimbal’s baseplate using supplied thumbscrews
- Connects to the gimbal via a USB cable and controls focus with zero latency
Zhiyun-Tech GMB-CMF-04 Specs
|Dimensions||4.8 x 5.4 x 2.6″ / 12.2 x 13.6 x 6.5 cm|
|Weight||11.6 oz / 330 g|